Signal Conditioner with Power Supply

data-acquisition.us
Forum dedicated to Data Acquisition and Signal Conditioning

Home • Forum • Books • Data Acquisition products

data-acquisition.us Forum Index -> Signal Processing and Conditioning

Author

Message

daqmaster
Site Admin

Joined: 27 Jun 2005
Posts: 385

Posted: Fri Feb 24, 2006 6:35 pm Post subject: Signal Conditioner with Power Supply

Danforth offers Signal Conditioners with Power Supplies. Here is their rationale for offering this feature:

Quote:

Think about any hand-held multimeter and you will agree how important input protection and isolation are to most measurement applications! The input voltage is isolated from you (because of the mechanical parts of the meter in your hand) and from ground (since the hand-held meter's power supply is not connected to any ground).

Dataforth's 3-Way isolated signal conditioners function like a hand-held meter with the output going to a data acquisition system and computer monitor or LCD display. Like a hand-held meter, Dataforth's signal conditioner will accept a ±Vdc input (is protected to 240Vrms continuous and isolated from ground to 1500Vrms continuous) and output a ±Vdc signal that has been amplified, filtered and isolated from hazardous ground loops and voltage transients.

In addition to 3-Way isolation, Dataforth's SCM5B43 and DSCA43 general purpose signal conditioning families include an ISOLATED POWER SUPPLY for use in your application or to power any external circuitry! Our general purpose power supply provides 10Vdc at 40mA maximum current. These products cost about $210 each. The 10Vdc voltage is an isolated, regulated, protected power source that can be used to power:

1. Your own proprietary circuit,
2. Whetstone bridge excitation,
3. Three-wire resistance inputs,
4. DC-LVDT position transducers,
5. Rotary torque sensors,
6. Voltage doubler & DC-DC converters,
7. Many other specialized or unique applications.

Contact info:

Phone: 520.741.1404
Fax: 520.917.2254
E-mail: sales@dataforth.com

Dataforth products are manufactured in the USA at:
Dataforth Corporation
3331 E Hemisphere Loop
Tucson, Arizona (AZ) 85706-5011
USA

Display posts from previous:

	data-acquisition.us Forum Index -> Signal Processing and Conditioning	All times are GMT
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum