data-acquisition.us
Forum dedicated to Data Acquisition and Signal Conditioning
 
Home  •  Forum  •  Books  •  Data Acquisition products
 
DataNAB DataBox Modular Ethernet Device

 
Post new topic   Reply to topic    data-acquisition.us Forum Index -> Other DAQ Vendors
Author Message
daqmaster
Site Admin


Joined: 27 Jun 2005
Posts: 385

PostPosted: Tue May 30, 2006 9:33 pm    Post subject: DataNAB DataBox Modular Ethernet Device Reply with quote

This device allows one to monitor machines over the internet in real time. The DataBox processes incoming signals from connected sensors on your equipment or machine and then send that data over a standard Ethernet network to any locally-networked computer. DataNAB's DataServer Software logs the data to a file or database, databox_world_cable and from there it can be made available to you anywhere that there is an internet connection or phone line.



You may connect to anything including key switches, pressure sensors, thermocouples, etc.

With the wide variety of signal types that is supported, thi device gives you the ability to instantly find out basically anything that you want to know about your machines. For instance, using a Databox you could find the cycle times and failure rates of multiple machines at multiple sites all at the same time. The level of service that you are able to provide your customers will may siginficanly increase if you have the ability to see/monitor things as they are happening.

------------------------
MORE INFO HERE:

1-888-7-DATANAB
info@DataNAB.com
------------------------

DataBox Technical Specifications:

Protection Class Housing, LEDs, and Connectors all rated to a minimum of IP67
# of Digital Inputs max of 28 signals for 5Vdc & 24Vdc
max of 14 signals for 48Vdc, 120Vac & 230Vac
# of Analog Inputs max of 28 signals for 0-10V
max of 14 signals for +/-10V, 0-20mA & 4-20mA
# of Temperature Inputs max of 28 signals for Thermocouples & RTD's
Power Source Required 21Vdc - 28Vdc
Power & Sensor Connectors Standard M12, 5-pin male plug
Input Current 100mA to 300mA depending on # and types of signals choosen
Starting Current Draw 2.5 x Input Current
Recommended Fuse Less than or equal to 2A
Transmission Protocol Standard Ethernet TcpIp
Data Transfer Rate 10/100 MBaud - AutoSensing
Physical Bus Connection Standard RJ45 Connector
Physical media / Cable type 4 x 2 twisted pair - copper
Cat3 (10MBaud) or Cat5 (100MBaud)
Max cable length 100m
Operating Temperature Range 35°F . . . 115°F
Storage Temperature Range -10°F . . . 180°F
Vibration/Shock resistance Conforms to IEC 68-2-6 / IEC 68-2-27
EMC Resistance Conforms to EN 50082 (ESD, Burst) / EN 50081[/img]
Back to top
Display posts from previous:   
Post new topic   Reply to topic    data-acquisition.us Forum Index -> Other DAQ Vendors All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group