data-acquisition.us

[daqmaster]

Measurement Computing introduces a new, external USB-based 8-channel thermocouple input temperature logger.



Hardware:
- 64MB Compact Flash card included
- 8 thermocouple input channels
- Supports J, K, R, S, T, N, E, & B type TCs
- Built-in ambient temp. sensor
- Independent temp inputs
- High/low alarms for triggering DIO
- 8 digital I/O bits

Software:
Included with hardware:
- InstaCal
- TM TracerDAQ
- TM SoftWIRE® eval. version Fully supported by:
- SoftWIRE®
- DASYLab®
- Universal Library®



Description:
The USB-5201 is a temperature logger that provides 8 thermocouple temperature inputs. Temperature measurements can be stored onto a 64MB Compact Flash card (included with hardware). The data can then be read and downloaded either by removing the CF card and inserting it into a CF reader, or by connecting the device up to a PC via the USB port.

The USB-5201 provides temperature measurement flexibility and convenience as it can be moved and installed anywhere you need to measure temperature, without the need for a dedicated PC or laptop. High/low alarms can be programmed to trigger DIO bits.

The USB-5201 offers the most accurate temperature measurement possible, since the internal measurement electronics accuracy exceeds the accuracy specifications of the temperature sensors. In other words, the USB-5201 will provide the best measurement your sensor is capable of.

The USB-5201 can be configured via the USB port using the included InstaCal in a matter of minutes. The data can be analyzed and charted using our powerful DAQ software, available in a full range of options--from no programming to graphical programming to custom programming.

For more info, contact:
http://www.measurementcomputing.com/
16 Commerce Boulevard, Middleboro, MA 02346
Phone 508 946-5100 Fax 508 946-9500 Email info@measurementcomputing.com