data-acquisition.us

[daqmaster]

Line-powered signal conditioners offer continuous operation of sensors without the hassle of changing batteries. These units are suitable for use in the lab, on an instrument cart, or on the factory floor. Installation within a protective enclosure is recommended for dirty, industrial environments. Each unit features a color-coded input circuit checkout meter, or LED display, to alert of proper sensor turn-on or input fault due to open or short circuit connections.



Model 482A21
Basic, low-noise, single-channel, unity gain ICP® sensor signal conditioner with AC or DC power
26 VDC @ 2 to 20 mA sensor excitation provided
6 to 60M cpm (0.1 to 1M Hz) frequency range (±5%)
3.25 µV broadband electrical noise
BNC jack sensor input connector
BNC jack signal output connector
DIN external DC power connector
Supplied with universal voltage AC power adaptor
Optional external DC voltage battery pack



Model 481A01
Rack mountable, 16-channel, unity gain ICP® sensor signal conditioner
24 VDC @ 3 to 20 mA sensor excitation provided
30 to 6M cpm (0.5 to 100k Hz) frequency range (±5%)
11 µV broadband electrical noise
BNC jack and DB50 sensor input connector
BNC jack and DB37 signal output connector
100 to 240 VAC, 47 to 63 Hz universal input power
Optional gain, filtering, integration, and keypad control







Model 443B01
Dual mode, single-channel, vibration amplifier for ICP® and charge mode sensors with continuous gain adjustment
24 VDC @ 2 to 20 mA sensor excitation provided (disabled for charge mode sensor input)
12 to 6M cpm (0.2 to 100k Hz) frequency range (±5%)
x0.1 to x1000 continuous gain adjustment (0.0001 to 10 volts/ pC charge input sensitivity conversion)
9 µV broadband electrical noise
BNC jack sensor input connector
BNC jack signal output connector
100 to 240 VAC, 50 to 60 Hz universal input power

More info at:
IMI Sensors
3425 Walden Avenue
Depew, New York 14043
24-hour "SensorLine" : 716-684-0001
Fax: 716-684-3823
E-mail: imi@pcb.com
http://www.imi-sensors.com/